top of page
Search

How Often Can a Property Manager Inspect a Rental?

Nov 8
7 min read

Quick Summary

A property manager can carry out routine rental inspections as often as each state and territory allows, which varies by location. Most jurisdictions cap routine inspections at once every three or six months, with at least seven days' written notice, so check your local tenancy rules before setting a schedule.

  • Frequency limits range from four times in 12 months (NSW) to once every three or six months elsewhere.

  • The first routine inspection usually cannot happen until at least three months after the tenancy starts.

  • Written notice of at least seven days is required in every listed jurisdiction.

  • High-risk properties, such as older homes or those with pools or gas, suit shorter inspection intervals.

  • Keep dated copies of every notice and inspection report to prove the visit was lawful.

How often can you inspect your rental?

BGM Realty runs compliant routine inspections across Brisbane and the Moreton Region.

Table of Contents

How Often a Property Manager Can Inspect a Rental

The frequency at which a property manager can carry out routine rental inspections is set by each state and territory, so the exact limit depends on where the property sits. Check your local tenancy rules before setting a schedule.

Routine inspections exist to check the condition of the home, spot maintenance issues early, and confirm the tenant is following the rental agreement. They are not a way to drop in whenever you like. Each state sets its own limits on how often and with what notice you may enter, so check your local tenancy rules before you book.

A common mistake is treating every visit as a routine inspection. Repairs, emergencies and other reasons to enter fall under separate rules, and mixing them up can lead to a breach claim.

Queensland Rental Inspection Notice Period

In Queensland, tenancy law requires written notice before a routine inspection, so check the current residential tenancy legislation for the notice requirements that apply.

Queensland tenancy rules also limit how often inspections can happen, so confirm the current rules with the Residential Tenancies Authority before setting your schedule.

Watch out: a verbal heads-up is not enough. Keep a copy of every written notice on file so you can prove the visit was lawful.

How State and Territory Rules Differ on Inspection Frequency

Inspection frequency is set jurisdiction by jurisdiction, and the differences are material enough that a single national schedule will put you offside somewhere. The table below summarises the core rules that affect how often a property manager can inspect a rental, when the first inspection can occur, and what notice must be given. Treat it as a working reference and confirm current figures with the relevant tenancy authority before you book, because these rules are amended from time to time.

Jurisdiction

Routine inspection frequency limit

First inspection after tenancy starts

Minimum written notice

Queensland

No more than once every three months

At least three months after the tenancy starts

At least seven days, stating a reasonable time

New South Wales

No more than four times in any 12-month period

At least three months after the tenancy starts

At least seven days

Victoria

No more than once every six months

At least three months after the tenancy starts

At least seven days

South Australia

No more than once every three months

At least three months after the tenancy starts

At least seven days

Western Australia

No more than once every three months

At least three months after the tenancy starts

At least seven days

Tasmania

No more than once every three months

At least three months after the tenancy starts

At least seven days

Australian Capital Territory

No more than once every six months

At least three months after the tenancy starts

At least seven days

Northern Territory

No more than once every three months

At least three months after the tenancy starts

At least seven days

Watch out: legal limits are a maximum, not a target. Visits that are poorly timed or unnecessarily intrusive can still breach a tenant's right to quiet enjoyment, so build your schedule with that in mind.

Building a Compliant Inspection Schedule and Workflow

Most guides stop at the legal maximum. The harder question is how to set a schedule that stays inside the limit while actually catching problems early. A workable approach is to rank each property by risk and tenancy stage, then place inspections where they do the most good rather than simply filling the annual quota.

A practical risk tiering looks like this:

  • High risk: older homes, properties with a history of maintenance complaints, tenancies in the first six months, or homes with pools, gas appliances or significant landscaping. Schedule at the shorter end of the legal window, such as every three months where permitted.

  • Medium risk: standard suburban rentals with no adverse history. A six-monthly rhythm usually satisfies the legal limit and still catches seasonal issues.

  • Low risk: recently built or recently renovated properties with stable, long-term tenants. An annual or six-monthly visit may be enough, provided it stays within the jurisdiction's maximum.

Once the tier is set, run a repeatable workflow for every visit:

  1. Confirm the limit. Check the jurisdiction's maximum frequency and the date of the last routine inspection so you do not exceed the cap.

  2. Check the first-inspection timing. If the tenancy is new, confirm the minimum period after the start date has passed.

  3. Issue written notice. State the reason for entry, the date, and a reasonable time window. Keep a copy on file with the date it was sent.

  4. Offer a suitable time. Give the tenant a chance to nominate an alternative within the notice period if the proposed time does not suit.

  5. Inspect systematically. Use a room-by-room checklist and take dated photographs of anything that needs attention.

  6. Document and follow up. Log repairs, set reminders, and send the tenant a short summary of any issues that affect them.

  7. Record the outcome. Note the date, attendees, findings, and any follow-up actions in the property file.

Clustering inspections by suburb or postcode can reduce travel time, and booking the next visit before leaving the current one can help avoid drifting past a notice deadline. For a closer look at how one contact point can streamline scheduling and tenant communication, see the benefits of a single point of contact.

Watch out: a workflow is only compliant if the notice is actually given within the required period. A calendar reminder that fires on the day of the inspection is too late; build the notice step into the schedule at least seven days before the visit.

Workflow diagram illustrating the four key stages of a compliant rental inspection process from notice to follow-up.

Rental Property Inspection Checklist: What to Check and Document

A thorough inspection covers the areas that tell you the most about the property's condition. Walk through each room with a checklist so nothing gets missed.

Focus on these areas:

  • Walls and ceilings: cracks, water stains, mould or paint damage

  • Floors: wear, lifted boards or trip hazards

  • Kitchen and bathroom: taps, drains, seals and appliances

  • Smoke alarms: working condition and placement

  • Windows and doors: locks, screens and any damage

  • Outdoor areas: gutters, fences and garden upkeep

Take dated photographs of each area and note anything that needs attention. Clear photos and notes protect both you and the owner if a dispute comes up later.

How Long a Rental Inspection Takes and Rental Inspection Report Examples

Most routine rental inspections take between 30 minutes and an hour, depending on the size of the home and how much needs checking. Larger properties or those with known maintenance issues may take longer. A rental inspection checklist can help keep these visits focused on the property’s condition and any maintenance concerns.

A typical inspection report should include the date and time, the people present, the condition of each room, and any photos. For example, a report might note "Kitchen tap leaking slightly under the sink, photo attached, plumber booked for next week." Specific, dated notes like this make follow-up much easier.

Handling Tenant Objections, Missed Appointments and Access Refusals

Tenants sometimes object to an inspection, miss an appointment, or refuse access. Stay calm and check the notice you sent. Before committing to a manager, read about hidden property management agency fees that can apply to missed or disputed inspections. If the notice met the legal requirements, reschedule politely and keep a written record of every attempt.

If a tenant keeps refusing lawful access, the next step is usually a formal process through the tribunal. Speak to the relevant tenancy authority before taking further action, so you follow the correct steps.

Booking Your Next Inspection Schedule With BGM Realty

Managing inspection timing across several properties takes time and careful record keeping. You can book online to arrange your next inspection appointment. Our property management service covers routine inspections as part of the wider management task, and you can request an appraisal to discuss how we can help with your properties. You can review our portfolios to see the kinds of properties we manage.

What to avoid when hiring a manager: ask how they handle notices, documentation and follow-up repairs, since these details decide whether your inspections stay compliant.

Frequently Asked Questions

How often should a property manager inspect a rental property?

In Queensland, a property manager or landlord can carry out a routine inspection only with proper written notice and within the limits set by tenancy law. Many managers schedule an inspection after the first few weeks of a tenancy, then move to a regular interval such as every three or six months. The exact limit depends on the state or territory, so check the current residential tenancy legislation where the property is located before setting a schedule.

How much notice does a property manager need to give before an inspection?

Queensland tenancy law requires written notice before a routine entry for inspection, so check the current legislation for the applicable notice requirements. Notice should state the date, time and purpose of the inspection. Provide the notice in writing well ahead of the visit, and keep a copy so you can show it if a tenant disputes the entry.

What can a property manager check during a routine inspection?

A routine inspection focuses on the general condition of the property, including walls, floors, kitchen and bathroom fittings, smoke alarms, and signs of damage or maintenance needs. Managers should not search personal belongings or enter rooms beyond the inspection's purpose. Record findings with dated photographs and a short written summary, and send the report to the tenant and owner so both parties have the same record.

Can a tenant refuse a routine rental inspection?

A tenant cannot refuse a properly notified routine inspection that complies with the tenancy legislation, but they can ask for a different time that is reasonable. If the tenant refuses or misses an appointment, document the notice you gave, the attempts made to arrange a new time, and any response received. Serious access refusals can be raised with the Residential Tenancies Authority or the relevant state tribunal.

 
 
 

Comments


bgm-emblem-cream-transparent-no-tagline.png

LIVING WITHOUT THE STRESS.

0407 286 741

PO Box 782, NORTH LAKES, QLD 4509

Serving Brisbane & the Moreton Region - North Lakes · Mango Hill · Burpengary · Caboolture · Deception Bay

© 2026 BGM Realty. All rights reserved

bottom of page